Oce BLM 500 Operating Information Manual page 55

Problem
BRIDGE MOTOR
STALL
CHECK THE TRIM BIN The trim bin is either open
COVER OPEN
DRIVE MOTOR STALL There is a paper jam.
Endlay axis moving
ERROR IN TRIM AREA There is an error at the
FLOW ERROR -
BRIDGE
Cause
Check for a paper jam in
the connecting bridge.
Touch STOP to stop
the Booklet maker.
Clear the paper jam.
Touch STOP to clear
the message from the
screen.
Continue the print job.
or full. Check the trim
bin. Empty the trim bin if
necessary.
A safety cover is open.
The machine will not
operate until the cover is
closed.
Check the machine and
correct the error.
Touch STOP to clear the
message from the screen.
The endlay axis (size
adjustment) is moving.
This message clears when
the adjustment is
complete.
If the message does not
clear, touch ADVANCED
> RE REF.
trimmer.
Check the trimmer for a
paper or book jam.
Touch STOP to clear the
message from the screen.
There is an error at the
connecting bridge. Open
the connecting bridge
cover and check for a
paper jam.
Error Messages
Solution
(see 'Clear Paper Jams'
on page 68)
(see 'Clear Paper Jams'
on page 68)
55