Table of Contents
Advertisement
Table 1: CPS3003-SA Main Specifications (Continued)
FEATURES
Front Panel LEDs
DIP Switch
Real Time Clock
Watchdog Timer
Thermal Management
TPM
uEFI BIOS
Operating Systems
www.kontron.com
System Status LEDs:
» HS (blue):
» TH (red/green):
» WD (green):
General Purpose LEDs:
» LED3..0 (red/green/red+green): General Purpose / POST Code
Ethernet LEDs:
» ACT (green):
» SPEED (green/orange):
One DIP switch, SW1, for board conf iguration
Real-time clock with 256 Byte CMOS RAM; batter y-backup available
Sof tware-conf igurable, two-stage Watchdog with programmable timeout ranging
from 125 ms to 4096 s in 16 steps
Serves for generating IRQ or hardware reset
CPU and board over temperature protection is provided by:
» Up to four Digital Thermal Sensors (DTS), one for each core
» One Digital Thermal Sensor (DTS) for the processor graphics controller
» One temperature sensor integrated in the Intel® QM77 Chipset for monitoring
the chipset
» Specially designed heat sinks
Trusted Platform Module (TPM) 1.2 for enhanced hardware- and sof tware-based
data and system security
AMI Aptio® BIOS f irmware based on the uEFI Specif ication and the Intel Platform
Innovation Framework for EFI:
» LAN boot capability for diskless systems (standard PXE)
» Redundant image; recovery possible in case of a damaged image
» Non-volatile storage of setting in the SPI boot flash (batter y only required for
the RTC)
» Compatibility Support Module (CSM) providing legacy BIOS compatibility
based on AMIBIOS8
» Command shell for diagnostics and conf iguration
» uEFI Shell commands executable from mass storage device in a Pre-OS envi-
ronment (open interface)
There are var ious operating systems available for the CPS3003-SA. For further
information, please contact Kontron.
SPECIFICATIONS
Hot Swap Status
Temperature Status
Watchdog Status
Network / Link Activity
Network Speed
User Guide
CPS3003-SA
17
Advertisement
Table of Contents
