Client Setup - Toshiba e-STUDIO GL-1020 Operator's Manual

34
®
Windows 2000
n
Microsoft Windows
w
Novell Client v4.7 or higher with Z.E.N works Starter
w
Pack is required to run IPX-based SNMP access and
Novell printing.
The Microsoft Client for NetWare may be used instead of
w
the Novell Client except for NDPS printers.
®
Windows XP
n
Novell Client v4.82 or higher is required to run IPX-
w
based SNMP access and Novell printing.
The Microsoft Client for NetWare may be used instead of
w
the Novell Client except for NDPS printers.
At least 60 MB free disk space on the destination drive;
n
120 MB for optimal performance.
To ensure successful implementation:
If your workstation had a previous version of TOSHIBA
n
software installed, the setup program detects it and opens the
Client Setup Maintenance Program. Click
all previously installed components.
®
The Windows Add/Remove Programs option, accessible
from the Windows
software.
Close all Windows
n
software.
If an old version of TOSHIBA client software is installed,
right-click the document monitoring application icon in the
system tray, then choose

Client Setup

1 Insert the TOSHIBA e-STUDIO GL-1020 Client CD-ROM
into the workstation's CD-ROM drive. If Auto-Run is
enabled, the InstallShield Setup Wizard starts automatically.
Otherwise, choose
the Setup.exe file on the CD-ROM. Click
setup program.
2 Follow the Setup Wizard through the installation steps. When
prompted:
®
2000 Service Pack 1 or higher
®
Control Panel, also deletes the old
®
applications before installing the new
from the short-cut menu.
Exit
from the Start menu and then locate
Run
GL-1020 Operator's Guide (Basic)
to delete
Remove
to launch the
OK