Toshiba e-STUDIO GL-1020 Operator's Manual page 219

Term
Bin
Booklet mode
Bypass Feeder
Cascade Printing
Cassette
Client/Server
Cover Sheet
Creep Size
Current Jobs
Device
DHCP
GL-1020 Operator's Guide (Basic)
Definition of Common Terms
An output tray of a finishing unit or other paper output peripheral
such as a mailbox sorter.
A feature where each page of a document is printed on a half
sheet of paper, which can then be folded and/or stapled to
produce a smaller booklet/magazine. Booklet mode was
previously known as magazine sort. The GL-1020 supports two
kinds of Booklet mode: left to right read mode and right to left read
mode.
See Stack Feed Bypass.
A feature where a copier switches to the next output tray when the
first designated output tray is full.
The copier's containers for input paper.
A network architecture in which client machines request services
and server machines provide the services.
A feature where one or two pages (front or front/back) are printed
with the original document as a cover. The cover sheet is stapled
with the document (if stapling is requested).
Creep refers to the amount by which each page sticks out
compared with the last page when folded in a stack. Generally,
the longer the document (i.e., the more pages it has), the greater
the creep size. If you plan on trimming the final booklet, specifying
the creep size can prevent the contents of the booklet from
"creeping" into the page's "trim zone". The minimum is 0 mm and
the maximum is 20 mm.
The list of all print and copy jobs currently queued to the selected
GL-1020 controller. You can view it using either the TopAccess or
the GL-DocMon application.
Refers to the GL-1020 controller connected to a network digital
copier. Often, the term device is used to refer to the entire
controller/copier system.
Dynamic Host Configuration Protocol. A TCP/IP protocol which
enables a network connected to the Internet to assign a
temporary IP address automatically to a host computer that
connects to the network.
Definition
219