Rebooting The Controller - Toshiba e-STUDIO GL-1020 Operator's Manual

100

Rebooting the Controller

It is sometimes necessary to reboot the controller before new
settings can take effect. At other times, you may need to reboot
the controller to synchronize communication with the copier
again. If possible, avoid rebooting the controller by physically
resetting it.
The preferred way to reboot is as follows:
1 Press
PRINTER/NETWORK
2 Press the tab.
PRINT
The main Print
menu
Sample Print menu screen on copier control panel
3 Press .
REBOOT
.
opens.
GL-1020 Operator's Guide (Basic)