Download Drivers From The Gl-1020 Controller - Toshiba e-STUDIO GL-1020 Operator's Manual

44

Download drivers from the GL-1020 Controller

The following procedure is the preferred method for downloading
drivers from the GL-1020 Controller. The method is known as
"Point-And-Print."
1 Browse the network for the controller device.
2 Once you have found the device on the network, click on it.
Three printer icons will appear named as follows: dssc,
gl_pc16 and gl_ps.
3 Double-clicking an icon will have the following result:
If you double-click the gl_pc16 icon, the PCL6 printer driver
n
will be installed on your system.
If you double-click the gl_ps icon, the PSL3 printer driver
n
will be installed on your system.
IMPORTANT! If you double-click the dssc icon, the PCL6
n
printer driver will be installed on your system.
The following procedure explains how to install drivers using the
Add Printer Wizard of a Windows
1 From the Start menu, choose
2 Double-click
Add Printer
Sample Add Printer Wizard from the Windows
3 Click
Next.
®
operating system.
Settings > Printers
to launch the Add Printer Wizard.
®
2000 operating system
GL-1020 Operator's Guide (Basic)
.