How Do I Shut Down The Gl-1020 - Toshiba e-STUDIO GL-1020 Operator's Manual

30
Rebooting procedure if all else fails
If you can't reboot the preferred way, do the following:
1 Press
PRINTER/NETWORK,
10 seconds
.
2 Press .
START
The controller reboots.
Warning! Do NOT reboot the controller unless absolutely
necessary. Any job currently being processed will be lost
during the rebooting process.

How Do I Shut Down the GL-1020?

To power down the system safely, start by shutting down the
controller from the copier's control panel. After you have shut
down the controller, you can safely power off the copier.
Shutting Down the Controller
Never power off the controller by flipping the power switch to the
OFF position. This may damage the controller's hard disk drive
or corrupt the GL-1020 software.
Instead, power down the controller from the copier's LCD touch
screen, using the Shut Down function.
1 Press
PRINTER/NETWORK
2 Press .
PRINT
The main Print
menu
Sample Print menu
holding down the button for at least
.
opens.
GL-1020 Operator's Guide (Basic)