Toshiba e-STUDIO GL-1020 Operator's Manual page 84

84
Click to retrieve current copier information.
Update Now
is grayed out when Dynamic Update is enabled and/or when
Now
Use Bidirectional Communication is disabled. The software
updates current settings when you access the Options dialog box.
Options Section
This section identifies the optional features connected to the
copier.
External Large Capacity Feeder
—inserts paper into documents.
Inserter
—holds paper cassettes.
Pedestal
—staples or saddle-stitches documents.
Finisher
—punches holes in documents.
Hole Punch Unit
Cassette Information
This section identifies enabled cassettes and the size and type of
paper they contain. If the configuration cannot be dynamically
retrieved, the default value is shown. Disabled and unavailable
cassettes are grayed out.
—is the standard upper drawer of the copier.
Upper Drawer
—is the standard lower drawer of the copier.
Lower Drawer
—is the first cassette of the optional pedestal.
1st Pedestal
—is the second cassette of the optional pedestal.
2nd Pedestal
—is the tandem large capacity feeder of the optional
Tandem LCF
pedestal.
—is the optional external large capacity feeder.
External LCF
Use Bidirectional Communication
communicate with the controller provided that the protocol
installed is either TCP/IP or IPX/SPX. The driver sends and
receives messages, including the copier configuration and
Department Code validation, etc., to and from the controller.
Select this option to have the printer driver automatically retrieve
the correct settings from the printer. If department code
enforcement is enabled, bidirectional communication verifies the
department code.
—controls when the driver communicates with the
Dynamic Update
controller to display configuration information.
—holds several reams of paper.
—enables the driver to
GL-1020 Operator's Guide (Basic)
Update