Toshiba e-STUDIO GL-1020 Operator's Manual page 152

152
1 Choose from the File menu.
Print
2 Choose the
Finishing Options
Sample Macintosh Finishing Option Properties window
3 To enable stapling, select the appropriate stapling positions
from the Stapling drop-down list.
Sample Macintosh Stapling Positions list
When the finishing unit is not installed, the stapling values
are dimmed (grayed-out). If the single-position stapler is
installed, only the "Upper Left (Portrait)" option is available.
4 To enable hole-punch, select
down list.
5 Click
Save Settings
to begin printing.
Print
properties category.
from the HolePunch drop-
On
to continue setting print options or click
GL-1020 Operator's Guide (Basic)