Shutting Down The Controller - Toshiba e-STUDIO GL-1020 Operator's Manual

102

Shutting Down the Controller

Gracefully powering down the TOSHIBA Network Document
Processing System begins with shutting down the controller from
the copier's control panel. After you have shut down the
controller, you can safely power off the copier.
Caution! Do NOT power off the controller by pressing the
controller's power switch for three seconds or more since this
may damage the controller's hard disk or corrupt its software.
Instead, power down the controller from the copier's LCD touch
screen, using the ShutDown function.
1 Press
PRINTER/NETWORK
2 Press the tab.
PRINT
The main Print
3 Press
SHUTDOWN
TopAccess prompts you to confirm your request.
Sample Shutdown Check screen on copier control panel
4 Press to proceed.
YES
To restart the controller, turn on its power switch.
.
opens.
menu
.
GL-1020 Operator's Guide (Basic)