Monitoring The Print Queue; About Print Queues - Toshiba e-STUDIO GL-1020 Operator's Manual

MONITORING THE PRINT QUEUE

GL-1020 Operator's Guide (Basic)
From the copier's LCD touch screen, you can manage scheduled
jobs, private print jobs, proof print jobs and TopAccessComposer
jobs.

About Print Queues

The information in this section applies to all types of print jobs.
Accessing a Print Queue
To select a print queue, perform these three initial steps:
1 Press
PRINTER/NETWORK
2 Press the tab.
PRINT
3 Press
SPECIAL PRINT JOBS
Then continue with the instructions in the relevant managing jobs
section.
Scrolling Through a Queue
Each print job screen has scroll arrows at the right hand side.
Press the up- and down-arrow soft keys to scroll through the jobs
in the list one at a time.
Use the double-arrow keys to move from page to page of listings.
Status Messages
"
Document has printed successfully
The job you sent to the controller printed without error. You may
retrieve the print job from the copier.
"
Private print document is being held
Your private print job has been spooled to the controller without
error. You can now go to the copier to release the job for printing.
You must enter the correct document identification number (DIN)
to print the job.
"
Document has been cancelled
The job you submitted for printing has been cancelled either at
your request or because the time-out interval was exceeded.
.
.
"
"
"
103