Finding The Printer's Address - Toshiba e-STUDIO GL-1020 Operator's Manual

FINDING THE PRINTER'S ADDRESS

GL-1020 Operator's Guide (Basic)
4 In the Rates dialog box, click and drag the slider along the
scale to set the rate from zero (0) seconds (left end) to the
maximum rate (right end). The rate appears in the box below
as you slide the slider.
If you set the rate to zero, GL-DocMon will not update
w
the screen.
The maximum rate is different for each item: event noti-
w
fications, printer status, and print queue.
5 Click to confirm the new rate and return to the Refresh
OK
Rates dialog box.
6 To close the Rates dialog box without setting a new rate, click
.
Cancel
This also returns you to the Refresh Rates dialog box.
7 From the Refresh Rates dialog box, click
and exit the Configuration window.
8 To use the default rates for all items, click
then click to apply the default rates and exit the
OK
Configuration window.
1 Click the
Discovery
The Discovery dialog box appears. The Discovery dialog box
contains a list of all printers installed on your computer along
with their address.
2 To update one of the listed printers, just click the desired
printer driver and then click
3 Click to accept the new setting and close the
OK
Configuration window.
tab.
.
Update
to set the rate
OK
,
Restore Defaults
177