D-Link DPH-400G User Manual
  1. Manuals
  2. Brands
  3. D-Link Manuals
  4. IP Phone
  5. DPH-400G
  6. User manual

D-Link DPH-400G User Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual

Advertisement

Table of Contents
loading

Related Manuals for D-Link DPH-400G

Summary of Contents for D-Link DPH-400G

  • Page 2: Safety Notices

    Safety Notices Please read the following safety notices before installing or using this phone. They are crucial for the safe and reliable operation of the device.  Please use the external power supply that is included in the package. Other power supplies may cause damage to the phone, affect the behavior or induce noise.

  • Page 3: Table Of Contents

    Table of Content INTRODUCING VOIP PHONE ..................... 6 ....................... 6 IMPLE NTRODUCTION ........................6 ELIVERY ONTENT ............................7 EYPAD ....................... 8 ORT FOR CONNECTING ........................9 CON INTRODUCTION ........................10 INTRODUCTION INITIAL CONNECTING AND SETTING .................. 12 ........................ 12 ONNECT THE PHONE 2.1.1 Connect to network .......................
  • Page 4 ............................21 4.10 ..................21 ROGRAMMABLE ONFIGURATION OTHER FUNCTIONS ........................25 ........................25 ANDDOWN ......................25 NONYMOUS ..........................25 UTING ..........................25 ..........................25 ..........................26 EDIAL ........................26 ALL COMPLETION ........................ 26 EADSET ..........................26 OWER IGHT 5.10 DTMF ..........................26 5.11 ........................
  • Page 5 8.3.5 Function Key ........................76 8.3.6 Maintenance.......................... 79 8.3.7 Security ..........................88 8.3.8 Logout........................... 93 APPENDIX ............................94 .......................... 94 PECIFICATION 9.1.1 Hardware ..........................94 9.1.2 Voice features ........................94 9.1.3 Network features ........................95 9.1.4 Maintenance and management....................96...

  • Page 6: Introducing Voip Phone

    1.1 Simple Introduction Thank you for your purchasing DPH-400G/DPH-400GE. DPH-400G/DPH-400GE is a full-feature telephone that provides voice communication over the same data network that your computer uses. This phone functions not only much like a traditional phone, allowing to place and receive calls, and enjoy other features that traditional phone has, but also it owns many data services features which you could not expect from a traditional telephone.

  • Page 7: Keypad

    1.3 Keypad Key name Function Description Navigation keys assist users for operating. In idle state they have special function. Navigation You can configure through the web page according to your patterns of use. Access to phone book, check the record list and add new records and revise the record.

  • Page 8: Port For Connecting

    1. In the hook off /hands-free mode, use the key to dial the last call number. Redial 2. In stand-by mode, it has a function to check the Outgoing Call. Make the phone into hands-free mode. Hands-free If power on, the indicator is light. Indicator light Keys combination, include functions such as...

  • Page 9: Icon Introduction

    Headset Port type: RJ-9 connector. Handset Port type: RJ-9 connector. External console Port type: RJ-11 direct connector. interface 1.5 Icon introduction Icon Description Call out. Call in. Call hold. Auto answer. Call mute. Contact. DND(Do not Disturb). In hand free mode. In handset mode.

  • Page 10: Led Introduction

    1.6 LED introduction Table 1 Programmable key LEDs for BLF LED Status Description Steady green The object is in idle status. Slow blinking red The object is ringing. Steady red The object is active. Fast blinking red The object is failed. The object is failed/ No subscribe Table 2 Programmable key LEDs for Presence LED Status...
  • Page 11 Power off.

  • Page 12: Initial Connecting And Setting

    2 Initial connecting and Setting 2.1 Connect the phone Connect to network 2.1.1 Step 1: Connect the IP Phone to the corporate IP telephony network. Before you connect the phone to the network, please check if your network can work normally.

  • Page 13: Power Adaptor Connection

    4. If phone has registered to the server, you can place or answer calls. 2.2 Basic Initialization DPH-400G/DPH-400GE is provided with a plenty of functions and parameters for configuration. User needs some network and VoIP knowledge so that user could understand the meanings of parameters. In order to make user use the phone more easily and convenient, there are basic configurations introduced which is mandatory to ensure phone calls.
  • Page 14 DHCP server available, phone has to be changed WAN network setting to Static IP or PPPoE. Setting PPPoE mode (for ADSL connection) 1. Get PPPoE account and password first. 2. Press Menu->Settings->Advanced Setting, then enter passwords, and choose network ->WAN->Net Mode, enter and choose PPPoE through navigation keys and press the Save key.

  • Page 15: Basic Function

    3 Basic function 3.1 Making a call Call Device 3.1.1 You can make a phone call via the following devices: 1. Pick up the handset, icon will be showed in the idle screen. 2. Press the Speaker button, icon will be showed in the idle screen. 3.

  • Page 16: Dnd

    3.3 DND Press the DND softkey to active DND Mode. New incoming calls will be rejected and the display will show: icon. Press the DND softkey to choose deactivate DND mode. Incoming calls will be stored in the Call History. 3.4 Call Forward This feature allows you to forward an incoming call to another phone number.

  • Page 17: Call Transfer

    get the phone to normal conversation. 3.8 Call transfer 1. Blind Transfer During talk, press the key Transf, and then dial the number that you want to transfer to, and finished by "#". Phone will transfer the current call to the third party.
  • Page 18 call hold and multi-line call.The user can answer 10 incoming call phones at most,you can choose any call through pressing the fluctuation navigation key in taiking and the other 9 calls will be in held.You also can press the fluctuation navigation key to change the call and recover the talking then last call will be held automatic.You also can define the four line keys as multi-line keys ,then each line key will relate to a call and you can choose the talking through pressing...

  • Page 19: Advanced Function

    4 Advanced function 4.1 Call pickup Call pickup is implemented by simulating pickup function of PBX. it‟s that, when A calls B, B rings but no answer, at this moment, C can hook off and input an appointed prefix plus B‟s number, pick up A‟s call and talk with A. The following chart shows how to configure an appointed prefix in dial peer to have call pick up function.

  • Page 20: Click To Dial

    number before making the redial function. *3* is appointed prefix code. After making the above configuration, A can dial *3* plus B‟s phone number to make the redial function. *4* is appointed prefix code. After configuration, A can dial *4* to cancel redial function.

  • Page 21: Memo

    send, then Send. 4) If you want to write a message, you can press New and enter message. Use the 123 softkey to change the Input Method. When you input the message you want to send, press OK, then use the navigation keys to select the line from which you want to send, then Send.
  • Page 22 Line As DSS Keys and Memory As DSS Keys, choose one you want to make the assignment, use the navigation key to choose the type as memory key. In the Dial field, you have some options, such as Normal, Speed Dial, Intercom, BLF, Presence, and MWI.
  • Page 23  MWI  DND (Do Not Disable)  Hold  Transfer  Phone Book  Redial  Pick up  Join  Auto Redial On  Auto Redial Off  Call Forwarding  History  Flash  Memo  Headset ...
  • Page 24 Notice: Detailed feature see 8.3.4.7...

  • Page 25: Other Functions

    5 Other functions 5.1 Auto Handdown Press Menu ->Features-> Enter->Auto Handdown-> Enter. 2. Set the Mode Enable through the navigation key, then set Time, unit is minute, then press Save. 3. When the call ends, after the time that you have set, the phone will back to the idle interface.

  • Page 26: Auto Redial

    5.6 Auto Redial 1. Press Menu ->Features-> Enter->Auto Redial-> Enter. 2. Choose Mode Enabled or Disabled through the navigation key. If you choose Enable, you also need to set Interval and Times, and then press Save. 3. After enable auto redial, calling out someone, if he is in busy, it will pop up a prompt box whether to auto redial, press OK, the phone will call out him according the Interval and Times that you set.

  • Page 27: Pre Dial

    want call out 1234567 and you set Password Dial Prefix 123 and Password Length 3, then enter the dial interface and input 1234567, and then the screen will show 123***7. 5.12 Pre Dial Press Menu ->Features-> Enter->Pre Dial-> Enter. 2. Through navigation key to enable the feature,and to realize the Pre Dial function.

  • Page 28: Basic Setting

    6 Basic setting 6.1 Keyboad 1. Press Menu ->Settings-> Enter->Basic Setting-> Enter->Keyboard->Enter. 2. There are four items: DSS Keys, Multiplex, Long Click, SoftKey, You can set up respectively on them. Press the key Enter to the interface, then use the navigation keys to choose the function for the key according to you want.

  • Page 29: Greeting Word

    2. You can enter the message and press Save, it will display in the phone screen when the phone start up. 6.7 Language Setting 1. Press Menu ->Settings-> Enter->Basic Setting-> Enter->Language->Enter. 2. DPH-400G/DPH-400GE support three languages, you can use the navigation keys to choose. The default two languages are English and Chinese.

  • Page 30: Advanced Settings

    7 Advanced settings 7.1 Account Press Menu->Enter->Advanced settings, and then input the password to enter the interface, the default password is 123. You can set it through the web page. Then choose Account then press Enter, you can do some SIP settings. 7.2 Network Press Menu->Enter->Advanced settings, and then input the password to enter the interface.

  • Page 31: Web Configuration

    8 Web configuration 8.1 Introduction of configuration Ways to configure 8.1.1 DPH-400G/DPH-400GE has three different ways to different users.  Use phone keypad.  Use web browser (recommendatory way).  Use telnet with CLI command. Password Configuration 8.1.2 There are two levels to access to phone: root level and general level. User with root level can browse and set all configuration parameters, while user with general level can set all configuration parameters except SIP (1~5) ‟s that some...

  • Page 32: Configuration Via Web

    8.3 Configuration via WEB BASIC 8.3.1 Status 8.3.1.1 Status Field name Explanation Shows the configuration information on WAN port, including the connect mode of WAN port (Static, DHCP, PPPoE), MAC address, the IP address of WAN port, IP Gateway,ON or OFF bridge mode. Accounts Shows the phone numbers provided by the SIP LINE 1~5 servers.
  • Page 33 Wizard Please select the proper network mode according to the network condition. DPH-400G/DPH-400GE provide three different network settings:  Static: If your ISP server provides you the static IP address, please select this mode, and then finish Static Mode setting. If you don‟t know about parameters of Static Mode setting, please ask your ISP for them.
  • Page 34 IP Address Input the IP address distributed to you. Subnet Mask Input the Netmask distributed to you. IP Gateway Input the Gateway address distributed to you. DNS Domain Set DNS domain postfix. When the domain which you input cannot be parsed, phone will automatically add this domain to the end of the domain which you input before and parse it again.
  • Page 35 Password SIP User Input the phone number assigned by your VOIP service provider. Enable Registration Start to register or not by selecting it or not. Display detailed information that you manual configure. Choose DHCP MODE，click【NEXT】can configure SIP(default SIP1)simply, also can browse too. Click 【BACK】 can return to the last page. Like Static IP MODE.

  • Page 36: Call Log

    Password Input your ADSL password. Notice: Click【Finish】button after finished your setting, IP Phone will save the setting automatically and reboot, After reboot, you can dial by the SIP account. Call Log 8.3.1.3 You can query all the dialed calls through this page. Call Log Field name explanation...

  • Page 37: Network

    Language Set the language of phone, English is default. The greeting message will display on LCD when Greeting Words phone is idle. It can support 16 chars. the default chars are VOIP PHONE. Notice: the maximal length of the greeting message is twelve English characters and five Chinese characters.
  • Page 38 Shows the time of getting MAC address Please select the proper network mode according to the network condition. DPH-400G/DPH-400GE provide three different network settings:  Static: If your ISP server provides you the static IP address, please select this mode, and then finish Static Mode setting. If you don‟t know about parameters of Static Mode setting, please ask your ISP for them.
  • Page 39 IP Address Input the IP address distributed to you. Subnet Mask Input the Netmask distributed to you. IP Gateway Input the Gateway address distributed to you. Set DNS domain postfix. When the domain which DNS Domain you input cannot be parsed, phone will automatically add this domain to the end of the domain which you input before and parse it again.
  • Page 40 In chart 1, there is a layer 2 that switches without setting VLAN. Any broadcast frame will be transmitted to the other ports except the send port. For example, a broadcast information is sent out from port 1 then transmitted to port 2,3and 4. In chart 2, red and blue indicate two different VLANs in the switch, and port 1 and port 2 belong to red VLAN, port 3 and port 4 belong to blue VLAN.
  • Page 41 QoS &VLAN LLDP Settings Enable LLDP Enable LLDP by selecting it. After enabling LLDP Learn, telephone can Enable Learning automatically learn the data of DSCP, 802.1p, VLAN Function ID from the switch. If the data is different from the data of the LLDP server, telephone will change its own value as the value of the switch (Synchronous with VLAN in switch).

  • Page 42: Service Port

    SIP 8021.p Priority Specify the value of the signal 802.1p priority, the range of the value is 0-7. Audio 802.1p Specify the value of the voice 802.1p priority, the Priority range of the value is 0-7. LAN Port VLAN Setting LAN Port VLAN Follow WAN: Follow the WAN ID.
  • Page 43 value is 8090, the accessing address is http://192.168.1.70:8090. HTTPS Port Before using the https, you must download https authentication certification into the phone, then set web browser port, the default is 443 port，if you want to enhance system safety，you'd better change it into non-443 standard port.
  • Page 44 TIME&DATE Field name explanation Simple Network Time Protocol (SNTP) Settings Enable SNTP Enable SNTP by selecting it. Enable DHCP Time Enable DHCP Time by selecting it, then the phone will automatically synchronize the standard time. Primary Server Set SNTP Primary Server IP address. Secondary Server Set SNTP Secondary Server IP address.

  • Page 45: Voip

    Default is 24 hours mode. Date format Specify the date display format. Daylight Saving Time Settings Enable Enable daylight saving time. Offset(minutes) Setup the variety length. Month Setup start and end month. Week Setup start and end week. Setup start and end day. Hour Setup start and end hours.

  • Page 47: Sip Config

    SIP Config Field name explanation SIP Line Choose line to set info about SIP, there are 5 lines to choose. You can switch by【Load】button. Basic Settings Status Shows if the phone has been registered the SIP server or not; or so, show Unapplied. Server Address Input your SIP server address.
  • Page 48 Server Name Named the server Enable Registration Start to register or not by selecting it or not. Codecs Settings Disable Use the navigation keys to highlight the desired one Codecs/Enable in the Enable/Disable Codecs list, and press the Codecs desired to move to the other list. Advanced SIP Setting Select call forward mode, the default is Off...
  • Page 49 SIP Encryption Key Set the key for sip encryption. RTP Encryption Enable/Disable RTP encryption. RTP Encryption Key Set the key for RTP encryption. Enable Auto Answer Enable Auto Answer by selecting it Auto Answer Specify Auto Answer Time, the phone auto answers Timeout the incoming call after Auto Answer Time Enable Session Timer...
  • Page 50 will send message to the server, and the server will turn on the function immediately. When there are calls to the extension, the server will always forward it to the set number automatically. And the IP phone will not show the record in the call history anymore. Always CFwd Off Set the Always CFwd Off Code, when you choose to Code...
  • Page 51 automatically. Keep Alive Type Specify the keep alive type, if the type is option, the phone will send option sip message to server every NAT Keep Alive Period(s), then the server responses with 200 to keep alive. If the type is UDP, the phone will send UDP message to server to keep alive every NAT Keep Alive Period(s).
  • Page 52 Call waiting return 182 code Server Type Select the special type of server which is encrypted, or has some unique requirements or call flows. Select SIP protocol version to adapt for the SIP RFC Protocol Edition server which uses the same version as you select. For example, if the server is CISCO5300, you need to change to RFC2543;...
  • Page 53 Enable Group Enable Group by selecting it, then the phone enable the sip group backup function Notice: the deployment will become effective in all sip lines Registration Failure Specify the registration failure retry time, if the Retry Time phone register failed, the phone will register again after registration failure retry time.
  • Page 54 STUN Field name explanation Simple Traversal of UDP through NATs (STUN) Settings STUN NAT Traversal Shows STUN NAT Transverse estimation, true means STUN can penetrate NAT, while False means not. Server Address Set your SIP STUN Server IP address. Server Port Set your SIP STUN Server Port.
  • Page 55 Use STUN Enable/Disable SIP STUN. Notice: SIP STUN is used to realize SIP penetration to NAT. If your phone configures STUN Server IP and Port (default is 3478), and enable SIP Stun, you can use the ordinary SIP Server to realize penetration to NAT. DIAL PEER 8.3.3.3 This functionality offers you more flexible dial rule, you can refer to the...
  • Page 56 DIAL PEER Field name explanation There are two types of matching conditions: one is full matching, the other is prefix matching. In the Full matching, you need input your desired phone number Phone number in this blank, and then you need dial the phone number to realize calling to what the phone number is mapped.
  • Page 57 1) Add: xxx, it means that you need dial xxx in front of phone number, which will reduce dialing number length. 2) All: xxx, it means that xxx will replace some phone number. 3) Del: It means that phone will delete the number with length appointed. 4) Rep: It means that phone will replace the number with length and number appointed.
  • Page 58 This setting will realize When you dial “2”, the SIP1 speed dial function, after you dialing the numeric server will key “2”, the number after receive all will be sent out. 33334444 The phone will When you dial “8309“, the SIP1 automatically send out alias number adding your server will...

  • Page 59: Phone

    Phone 8.3.4 Audio 8.3.4.1 In this page, you can configure voice codec, input/output volume and so on. DSP Configuration Field name explanation First Codec The first preferential DSP codec:G.711A/U,G.722,G.723.1, G.726-32, G.729AB,ILBC,AMR,AMR-WB Second Codec The second preferential DSP codec: G.711A/U,G.722,G.723.1, G.726-32, G.729AB,ILBC,AMR,AMR-WB,NONE Third Codec The third preferential DSP codec:...
  • Page 60 ILBC,AMR,AMR-WB,NONE Sixth codec The sixth preferential DSP codec: G.711A/U,G.722,G.723.1, G.726-32,G.729AB,ILBC,AMR,AMR-WB,NONE Seventh Codec The seventh preferential DSP codec: G.711A/U,G.722,G.723.1, G.726-32, G.729AB,ILBC,AMR,AMR-WB,NONE Eighth Codec The eighth preferential DSP codec: G.711A/U,G.722,G.723.1, G.726-32, G.729AB, ILBC,AMR,AMR-WB,NONE Ninth Codec The ninth preferential DSP codec: G.711A/U,G.722,G.723.1, G.726-32, G.729AB, ILBC,AMR,AMR-WB,NONE Onhook Time Specify the least reflection time of Hand down, the...
  • Page 61 FEATURE 8.3.4.2 In this web page, you can configure Call Transfer, Call Waiting, 3 Ways Call, Black List, white list Limit List and so on. FEATURE Field name explanation Do Not There are there options: Disturb Disabled: The phone accept any normal incoming call Phone: The phone rejects any incoming call, the caller will automatically prompt hang up, but outgoing calls will not be affected...
  • Page 62 Enable Call Enable Call Transfer by selecting it. Transfer Semi-Attend Enable Semi-Attended Transfer by selecting it ed Transfer Enable Auto The phone will hang up and return to the idle automatically at Handdown hands-free mode Auto Specify Auto Hand down Time, the phone will hang up and Handdown return to the idle automatically after Auto Hand down Time at Time...
  • Page 63 the Password Length is 2, then you enter the number 34567, it will display 3**67 on the phone Password Specify the prefix of the password call number Dial Prefix Password Specify the Password length Length Enable Call Waiting by selecting it. then the phone reminds Enable Call whether redial, when the caller is busy or rejects .
  • Page 64 Line at most two road calls When enabled, a sip line becomes the default line; disabled, Enable the phone will begin in accordance with the line from the SIP1 Default Line sequential search, select an available line for calls. Prerequisite: Enable Default Line ON: If sip1 registration fails, it will automatically find the first available line down Enable Auto...
  • Page 65 hang up handle or press speaker, you can transfer the current call to the number. 6) Attend Transfer on OnHook: hang up handle or press speaker you can realize the blind transfer function. 7) Press DSS Key to Do Blind Transfer: press dss-key, the phone will transfer the current call to the third party 8) User defined: you can customize digital map rules to make dialing more flexible.
  • Page 66 seconds Press # to Do Blind Enable Blind Transfer On Hook, when executing Blind Transfer Transfer End with #, press # after inputting the number that you want to transfer, the phone will transfer the current call to the third party Blind Transfer on Enable Blind Transfer on On Hook, when executing OnHook...
  • Page 67 to your set rules. CONTACT 8.3.4.4 You can input the name, phone number and select ring type for each name here. CONTACT Field name explanation...
  • Page 68 Phonebook Table Name Shows the name corresponding to the phone number Number Shows the phone number Ring Type Shows the ring type of the incoming call. Group Shows the group of the contact Notice: the maximum capability of the phonebook is 500 items, you can select many or a contact to add to group and add to blacklist, and delete many or a contact, and delete all contacts.
  • Page 69 vcf model Blacklist Settings Type Select the blacklist type, you can select number or prefix of number Value Input number or prefix of number Line Select the sip line Notice: the add button for adding a new blacklist, the delete button for deleting one item, the delete all button for deleting all items.

  • Page 70: Remote Contact

    REMOTE CONTACT 8.3.4.5 You need to match a XML Phonebook address and you can directly access to the corresponding remote phonebook on the phone. Remote Phonebook Setting Phonebook Name Custom the phonebook name displayed on the phone Server URL Specify the server url of the remote phonebook Sip Line Specify the sip line for the remote phonebook Authentication...

  • Page 71: Web Dial

    There are four options: NONE, Authentication DIGEST-MD5,CRAM-MD5,Simple Line contacts call using the selected line Username Enter username Password Enter password Search Base query the root directory access to LDAP the phone search LDAP server in the outgoing / Enable Calling Search incoming call .
  • Page 72 MCAST 8.3.4.7 Use the multicast function to send notice to every member of the multicast is simple and easy. By setting the multicast key on your phone, you can send multicast RTP flow to the pre-configured multicast address. By listening multicast address is configured on the phone, listen and play the multicast address to send the RTP stream.
  • Page 73 receive the RTP stream. Multicast functionkey LED lights yellow. LCD screen displays the following: 2、 Press the hold softkey to hold the current multicast session 3、 Press the end softkey again or multicast functionkey, multicast session can be stopped Notice: RTP stream is one side, that is from a sender to a receiver. when the phone initiates a multicast RTP session in a call,the current call is on hold.
  • Page 74 Now multicast ss has higher priority than multicast ee, the highest priority is for normal calls Notice: When a multicast session begins, multicast sender and receiver will beep TONE 8.3.4.8 You can select the desired tone standard, also can customize the settings...
  • Page 75 Action URL 8.3.4.9 Specify the Action URL that Record the operation of phone, send these corresponding information server, url:http://InternalServer /FileName.xml?(Internal Server is server ip, FileName is name of xml that contains the action message )

  • Page 76: Function Key

    Function Key 8.3.5 Function Key 8.3.5.1 Field name explanation Contrast Set contrast of screen Enable Backlight Set enable/disable backlight You don‟t operate the phone more than a backlight Backlight Time timeout setting, the backlight will turn off automatically Line Key Settings Line: select Auto, SIP1, SIP2, SIP3, SIP4, or IAX2 in function key type.
  • Page 77 Function Key Settings Show the function key's serial number Type Memory Key: settings can be stored in key storage for each number, the standby or off-hook, select the function keys on the keyboard can call this number. Line, set the dial mode (Auto, SIP1, SIP2, SIP3, SIP4, IAX2).Key Key Event functions, monitor state.

  • Page 78: Ext Key

    8.3.5.2 EXT KEY has the same usage with the Function key. “In” port connects the EXT KEY phone, “Out” port connects the next one, if there is only, you don‟t need for power supply, if there are more than one, you need supply 5V power for the first one, and use RJ-45 direct connector.

  • Page 79: Maintenance

    8.3.5.3 SOFTKEY You can configure different functions in different screens for every softkey. Maintenance 8.3.6 Auto Provision 8.3.6.1...

  • Page 80: Auto Provision

    Fanvil endpoint supports PnP and DHCP and Phone Flash to obtain the parameters. The PnP and DHCP and Phone Flash are all deployed, endpoint will go by the following process to try to obtain the server address and other parameters, when it boots up: DHCP option ...
  • Page 81 configurations are the same, the auto provision would stop here. If the endpoints confirm the configuration by Digest method, the endpoints wouldn‟t upgrade configuration unless the configuration in the server is different with the running configuration. CPE Serial Number Show CPE Serial Number User Specify FTP/HTTP/HTTPS server Username.
  • Page 82 name keep blank. For example, 000102030405.。 Protocol Type Specify the Protocol type FTP、TFTP or HTTP. Update Interval Specify update interval time, unit is hour. Different update modes: 1. Disable: means no update Update Mode 2. Update after reboot: means update after reboot. 3.

  • Page 83: Syslog Configuration

    Syslog Configuration Field name explanation Syslog Setting Server Address Set Syslog server IP address. Server Port Set Syslog server port. MGR Log Level Set the level of MGR log. SIP Log Level Set the level of SIP log. Enable Syslog Select it or not to enable or disable syslog.

  • Page 84: Config Setting

    Config 8.3.6.3 Config Setting Field name explanation You can save all changes of configurations. Click the Save Configuration Save button, all changes of configuration will be saved, and be effective immediately. Right clicks on “Right click here…” and select “Save Backup Target As config File(.txt)”...
  • Page 85 Update Field name explanation Web Update Click the browse button, find out the config file saved Web Update before or provided by manufacturer, download it to the phone directly, press “Update” to save. You can also update downloaded update file, logo picture, ring, mmiset file by web.
  • Page 86 000102030405. Notice: You can modify the exported config file. And you can also download config file which includes several modules that need to be imported. For example, you can download a config file just keep with SIP module. After reboot, other modules of system still use previous setting and are not lost. Action type that system want to execute：...

  • Page 87: Access Configuration

    Access Configuration Field name explanation Keyboard Password Set the password for entering the setting menu of the phone by the phone„s key board. The password is digit. This table shows the current user existed. User Set account user name. User Level Set user level, Root user has the right to modify configuration, General can only read.

  • Page 88: Security

    REBOOT 8.3.6.6 If you modified some configurations which need the phone‟s reboot to be effective, you need click the Reboot, then the phone will reboot immediately. Notice: Before reboot, you need confirm that you have saved all configurations. Security 8.3.7 Web Filter 8.3.7.1 WEB Filter...

  • Page 89: Firewall Configuration

    Set initial IP address in the Start IP column, Set end IP address in the End IP column, and click Add to add this IP segment. You can also click Delete to delete the selected IP segment. Web Filter setting Select it or not to enable or disable Web Filter.
  • Page 90 access lists: one for filtering input packets, and the other for filtering output packets. Each kind of list could be added 10 items. We will give you an instance for your reference. Field name explanation Enable Input Rules Select it to Enable Input Rules Enable Output Select it to Enable Output Rules Rules...

  • Page 91: Vpn Configuration

    8.3.7.3 This web page provides us a safe connect mode by which we can make remote access to enterprise inner network from public network. That is to say, you can set it to connect public networks in different areas into inner network via a special tunnel.
  • Page 92 VPN IP Shows the current VPN IP address Select L2TP. You can choose only one for current state. After you select it, you‟d better save configuration and reboot your phone. Enable VPN Select it or not to enable or disable VPN； VPN Server Addr Set VPN L2TP Server IP address VPN User Name...

  • Page 93: Logout

    Open VPN Files Show Open VPN File authentication certification file Logout 8.3.8 Click Logout，and you will exit web page. If you want to enter it next time, you need input user name and password again.

  • Page 94: Appendix

    9 Appendix 9.1 Specification Hardware 9.1.1 Item DPH-400G/DPH-400GE Adapter Input: 100-240V (Input / Output) Output: 5V 1A port 10/100Base- T RJ-45 1 PORT 10/100Base- T RJ-45 1 PORT RJ11 1 PORT Power Idle: 2.5W/Active: 2.8W Consumption LCD Size 128x64 53.5 x 70mm Operation 0～40℃...

  • Page 95: Network Features

     SIP support SIP domain, SIP authentication(none basic, MD5), DNS name of server, Peer to Peer/ IP call  Automatically select calling line, if one line can‟t be connected, the phone can automatically switch to other line to call.  9 kinds of ring types and 3 user-defined music rings ...

  • Page 96: Maintenance And Management

     Wan Port supports main DNS and secondary DNS server, can select dynamically to get DNS in DHCP mode or statically set DNS address.  Support DHCP client on WAN  QoS with DiffServ  Network tools in telnet server: including ping, telnet client ...

This manual is also suitable for:

Dph-400ge

Table of Contents