Powering On The System; Figure 3-11: Can Bus Jumper Locations; Figure 3-12: Power Input Connector Pinouts; Table 3-4: Can Bus Jumper Settings - IEI Technology SBOX-100-QM87i User Manual

SBOX-100-QM87i Fanless Marine Computer

Figure 3-11: CAN Bus Jumper Locations

JP1 & JP2 DESCRIPTION
Short Long wire transmitting
Open Normal

Table 3-4: CAN Bus Jumper Settings

3.8 Powering On the System

To power on the system, follow the steps below:
Connect the power cable to the 3-pin power input terminal block.
Step 1:
The pinouts of the power input connectors are shown below.

Figure 3-12: Power Input Connector Pinouts

Push the power button on the I/O panel to power on the system.
Step 2: Step 0:
Page 21