Programming A New Personal Profile - Tandem T:Slim User Manual

Chapter 6 – Personal Profile
NOTE
Tap once for first letter displayed, 2 quick
taps for middle letter; and 3 quick taps for
the third letter.
6. Tap Press to Setup to begin
setting insulin delivery settings.
Weekday
BACK
Timed Settings
Press to Set Up
Bolus Settings
5 hrs 10 u OFF
DURATION MAX BOLUS CARBS
78
6.3 Programming a New
Personal Profile
NOTE
Once the Personal Profile has been created, the
settings must be programmed. The first time
segment will start at 12:00 AM (midnight).
» You must program a basal rate in order to
have a Personal Profile that you can activate.
» Be sure to tap SAVE after entering or
changing a value.
PRECAUTION
If you only define a basal rate in Timed Settings
your pump will only be able to deliver basal
insulin and standard and extended boluses.
Your pump will not deliver correction boluses or
trigger BG alerts.
Timed Settings
12:00 AM
BACK SAVE
Basal Press to Set Up
Correction Factor Press to Set Up
Carb Ratio Press to Set Up
Target BG Press to Set Up
1. Once the new profile has been
created, Tap Basal.
2. Using the onscreen keypad, enter
your basal rate and tap DONE.
PRECAUTION
Always confirm that the decimal point
placement is correct.
3. Tap Correction Factor.
4. Using the onscreen keypad, enter
your correction factor and tap
DONE.
NOTE
Enter the mg/dL that 1 unit of insulin will
lower BG.
Customer Technical Support: 1-877-801-6901