Page 1
⚑ Note: These instructions are provided as a reference tool for pump users and caregivers who are already familiar with the use of an insulin pump and with insulin therapy in general. Not all screens are shown. For more detailed information on the operation of the Tandem Mobi system, please refer to its user guide. ☚...
Page 2
☚ Remove the empty cartridge Connect the infusion and place the filled cartridge set tubing to the tubing on the pump. Tap Continue. connector on the cartridge. Tap Continue and then Yes The Cartridge Changed screen to confirm that the infusion will display.
Page 3
☚ ☚ Insert the new infusion set or Tap Fill Cannula. Enter the reconnect the filled tubing to amount needed and tap the site, then tap Finish. Done. Tap Start to continue. ⚑ Note: Skip to step 10 if you did not insert ⚑...
Page 4
Open to continue → * The Tandem Mobi insulin pump may only be paired with one Tandem Mobi mobile app at a time. Pairing the pump with a new mo- bile app will remove the connection to previously connected devices.
Page 5
Drawing Insulin: When filling the cartridge, add the amount of insulin needed for delivery, plus 5-30 units depending on the tubing length being used. Remove the cartridge set from its sterile packaging Pull the fill rod down completely and then push it back up to force the air out of the cartridge (see image A) Pull the fill rod down to the desired volume.
Page 6
Follow instructions from local regulations to properly dispose of used needles, cartridges, set components, and infusion sets Open the Tandem Mobi mobile app on your smartphone From Navigation bar, tap Actions and then Load Cartridge Flip to the front side and continue with instructions...
Need help?
Do you have a question about the Mobi Cartridge and is the answer not in the manual?
Questions and answers