Meiko UPster U 400 M2 Original Operating Instructions
  1. Manuals
  2. Brands
  3. Meiko Manuals
  4. Dishwasher
  5. UPster U 400 M2
  6. Original operating instructions
Meiko UPster U 400 M2 Original Operating Instructions

Meiko UPster U 400 M2 Original Operating Instructions

Glass- and dishwasher
Hide thumbs Also See for UPster U 400 M2:
Table of Contents

Advertisement

Quick Links

Download this manual
UPster U 400 M2
Glass- and dishwasher
Original operating instructions
For the types in the series:
Before using the machine, read carefully the operating
EN
instructions, the product description and the safety
instructions.
9760441 / Valid from: 2018-02 / Update: 2024-05
M001DWUC10M2-10
www.meiko.info

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the UPster U 400 M2 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Meiko UPster U 400 M2

Summary of Contents for Meiko UPster U 400 M2

  • Page 1 UPster U 400 M2 Glass- and dishwasher Original operating instructions M001DWUC10M2-10 For the types in the series: Before using the machine, read carefully the operating instructions, the product description and the safety instructions. 9760441 / Valid from: 2018-02 / Update: 2024-05...

  • Page 2: Table Of Contents

    Contents NOTES ON THE OPERATING INSTRUCTIONS ............4 Product identification Delivery contents Related documents LIABILITY AND WARRANTY..................4 SAFETY ........................5 Symbol explanation 3.1.1 Notes in the instructions 3.1.2 Safety symbols in the instructions Requirements for the personnel Residual risks Intended use Foreseeable misuse Fundamental safety and accident prevention regulations...
  • Page 3 UPster U 400 M 2 Prepare dishwasher 8.2.1 Putting the machine into operation Washing 8.3.1 Putting away washware 8.3.2 Select wash programme 8.3.3 Start wash cycle 8.3.4 Emptying the washware Shutting down the dishwasher Fill consumables 8.5.1 Refill of internal storage container 8.5.2 Replacing the canister Changing water...

  • Page 4: Notes On The Operating Instructions

    Service instructions Liability and warranty All of MEIKO’s obligations arise from the relevant purchase contract, which also con- tains the entire and only valid guarantee provisions. These contractual guarantee provisions shall be neither extended nor restricted as a result of any explanations given in the instructions.

  • Page 5: Safety

    Claims must be reported to the manufacturer immediately after determination of the defect or error. Liability claims for personal injury or material damage as well as for operational problems are excluded if they are due to one or more of the following causes: •...

  • Page 6: Safety Symbols In The Instructions

    Note The signal word Note designates further information on the machine / system or its application. 3.1.2 Safety symbols in the instructions The following note and danger symbols are used both in the document and on the machine. Observe these symbols and signs on the machine to avoid personal injury and material damage! The symbols have the following meanings: Symbol...

  • Page 7: Requirements For The Personnel

    Requirements for the personnel Commissioning, instructions, repairs, maintenance, assembly and installation of or on MEIKO machines must only be carried out/authorised by MEIKO-authorised ser- vice partners. During operation it must be ensured that: • Only adequately trained and instructed personnel are allowed to work on the machine.
  • Page 8 Residual risks Phase Activity Nature of the hazard Avoidance measure • Load-bearing capacity of the forklift truck must be adequate for the weight of the machine Loading and unloading Crushing/impact • with forklift truck Please note the machine's centre of gravity •...
  • Page 9 The washware must be suitable for dishwashing machines. If there is any doubt, a consultation (size, version, basic suitability for dishwashing machine, etc) can be carried out with MEIKO to confirm suitability. The following applications are expressly not intended: •...
  • Page 10 Fundamental safety and accident prevention regulations Note The following safety instructions aim to protect operating personnel as well as third parties and the dishwashing machine itself. Please take note of the information in these instructions and the signs on the dish- washing machine.
  • Page 11 • At the end of operation: – Switch off the dishwashing machine at the on-site mains disconnection de- vice. This is located in the electricity supply pipe for the machine. – Close the on-site stop valve in the fresh water supply line. Information on use of detergent and rinse aid: •...
  • Page 12 Product description Functional description The UPster U 400 M2 is a commercial glasswasher with a square rack. The dishwasher has one wash and one final rinse cycle. A temperature regulator maintains the set wash temperature of between 58-60 °C. A rotary pump circulates the water from the wash tank into the wash nozzles.
  • Page 13 Overview illustration Exterior view 1 Operating panel (see page 23) 1 Potential equalisation connection 2 Fresh water connection G ¾” 2 Door handle 3 Door 3 Electrical connection 4 Detergent storage tank (option) 4 Waste water connection 5 Storage tank for rinse agent (option) 5 Connections for detergent and rinse aid 6 Height-adjustable foot Interior view...
  • Page 14 Do not mix different chemical products. Caution • Only use products that are suitable and approved for commercial dishwashers. MEIKO recommends MEIKO ACTIVE detergent and rinse aid. MEIKO ACTIVE products are optimally adapted to MEIKO dishwashing machines. • Do not mix different cleaning products.
  • Page 15 The correct dosage is achieved when the water drips evenly from the washware and depends on the available water quality on-site. This setting is made during commis- sioning by an service technician authorised by MEIKO or the chemical supplier. Change dosing quantity, see chapter “Dosing system level” on page 37.
  • Page 16 Technical data MEIKO has created a dimensional drawing that shows machine dimensions as well as connection and consumption values. Further data should be taken from the MEIKO dimensional drawing.
  • Page 17 Check the machine for transportation damage. Note If there is any suspicion of transportation damage, the shipping company and MEIKO must be informed immediately in writing. Photograph any damaged parts and send the pictures to MEIKO. 6.1.2 Requirements for the installation area Installation of the dishwashing machine in an area where the ambient temperature is below 0°...
  • Page 18 6.1.5 Requirements for the fresh water connection Fresh water connections and their components must be carried out in accord- ance with local regulations, e.g. EN 1717/DIN 1988-100. The fresh water must be of the same quality as drinking water in microbiological terms. This also applies to processed water.
  • Page 19 Fuse protection • • Set up the machine according to the local conditions and according to the rated current (see rating plate) as a separately fused circuit (final circuit). Take note of the available connection variants. Main switch/mains connection cable •...
  • Page 20 Transport WARNING – danger of injury due to machine tipping • Only qualified personnel may carry out transport works. • Please note safety notices on the packaging. • Always transport the machine on a wooden frame only. • Wear protective gloves and safety shoes. The packaging is specifically designed to allow the appliances to be moved safely and securely using a pallet jack or a sack truck.
  • Page 21 Assembly must be carried out in accordance with the installation drawing. • Ensure the machine is level in both directions by using a water level. • Compensate for an uneven floor by adjusting the foot studs (1). • Table joints must be sealed with detergent-resistant sealing compound (e.g. sil- icone).
  • Page 22 Perform commissioning Note Instruction and initial commissioning may be performed only by an authorised ser- vice technician! The operator must not use the dishwashing machine before com- pleting training. To avoid damage to the appliance or dangerous injuries during commissioning of the machine, please note the following points: •...
  • Page 23 Operation/use Membrane key pad The dishwasher is equipped with a membrane key pad. It includes 4 operating keys and 3 control lights. A display reports the current temperatures of the wash and rinse water and displays information messages and error codes, if applicable. Control lights with the keys show readiness to operate, the active wash programme, the cur- rent wash cycle and, if applicable, necessary and active regeneration.
  • Page 24 Prepare dishwasher Warning Risk of injury from contact with chemicals • Observe the safety data sheets and dosing recommendations of the chemical manufacturers. • Use eye protection. • Wear protective gloves. • Do not mix different chemical products. 1. Switch on the power. 2.
  • Page 25 8.2.1 Putting the machine into operation The dishwasher is closed and does not have a rack inside. 1. Press on/off key. The dishwasher is filling and heating up. During this time, the control light flashes over the selected wash programme key. The time required for the machine to be ready to operate depends on the temperature of the water supply and the installed boiler or tank heating capacity.
  • Page 26 8.3.2 Select wash programme 1. Press the desired wash programme key. The control light of the selected wash programme key is lit. Wash programme Meaning Washware Short programme• Lightly soiled washware Standard pro- Normally soiled washware gramme‚ Intensive pro- Heavily soiled washware grammeƒ...
  • Page 27 Wash time setpoint Wash programme Setpoint boiler temperature Washing Total [°C] 37–48 Note The concentration of the rinse aid in the water remains constant: if the rinse time is changed, the dosage amount of the rinse aid changes correspondingly. 8.3.3 Start wash cycle 1.
  • Page 28 7. Press the wash key. The control light above the wash key is lit. The machine washes automatically and switches the programme off after completion. The wash cycle time may differ from the set programme running time if the pro- gramme running time is not sufficient to heat up the boiler and tank water to the pre-set temperature.
  • Page 29 Shutting down the dishwasher The dishwashing machine does not have a rack inside. 1. Press On/Off button. All control lights turn off. 2. Remove the stand pipe and close the door. For dishwashing machines without drain pump, water runs into the drain. For dish- washing machines with drain pump, pressing the wash key starts the drain pump process.
  • Page 30 Dosing recommendation 2. Pour the appropriate chemical for dosing into a measuring cup. Maximum filling quantity UPster U 400 M2 Detergent / rinse aid 480 ml 3. Use the loading chute to pour the chemical carefully into the tank until full.
  • Page 31 Unsuitable detergent Change product Unsuitable rinse aid Change product As a rule, malfunctions that are not described here require assistance from a service technician authorised by MEIKO. Please contact your market organisation or an au- thorised dealer. 9760441 31 / 48...
  • Page 32 8.7.1 Messages When a malfunction occurs, an information or error message (INFO/ERR) is dis- played. • Information messages (INFO) can be acknowledged with the wash key. If the cause has been remedied (see table), operation can be continued. • Error messages (ERR) usually require the deployment of an authorised service technician! •...
  • Page 33 Description Possible cause Measures / remedial action • EEPROM • Not possible to continue – Not present/defective working EEPROM error – Installed incorrectly • Call a service technician! – Incorrect data/empty • Not possible to continue • working Floor pan leakage There is a leak •...
  • Page 34 Description Possible cause Measures / remedial action • Feeding water pressure too low • • Check water supply Inlet filter soiled • • Check feed hose Number of circulatory pumping Rinse nozzles dirty cycles for tank filling exceeded • • Clean inlet filter Air trap dirty Tank level analysis disrupted...
  • Page 35 Change authorisation level Key/symbol Meaning On/Off button Start programming Wash key Confirm entry and jump to next position in the code Wash programme key 1 Increase value by one Wash programme key 2 Decrease value by one 1. Press and hold the on/off key for approximately three seconds. 2.
  • Page 36 Service level Code display Meaning View parameter, see page 36. Vent rinse pipe, see page 36. Vent detergent line, see page 36. Reset the counter for replacing the partial desalination cartridge, see page 37. 8.9.1 View parameters 1. Switch to authorisation level 1 Service level (10000), see chapter “ Change authorisation level”...
  • Page 37 8.9.3 Replace counter for partial desalination cartridge (optional) For dishwashers with a partial desalination cartridge and activated end-of-service indicator, the counter must be reset after changing the partial desalination car- tridge. 1. Switch to authorisation level 1 Service level (10001), see page 35. 2.
  • Page 38 Maintenance and cleaning Warning Danger to life from electric shock Contact with live electrical parts can lead to serious injury or death. • Work at or repairs to the electrical system must be conducted by a qualified electrician who complies with the electrotechnical rules. •...
  • Page 39 Maintenance Note MEIKO recommends having the machine serviced by an authorised service techni- cian at least once a year. As part of the maintenance, an electrical safety inspec- tion is also carried out in accordance with DIN VDE 0701-0702 / DGUV Regulation 3.
  • Page 40 Maintenance table Note Maintenance work must only be carried out by MEIKO authorised staff! Mainte- Maintenance work nance re- Visual check quirements Error memory Check error memory for unusual events using M-Commander 2.7 Wash tank, wash and rinse system Functional and visual check of washing and rinse arms...
  • Page 41 Mainte- Maintenance work nance re- Visual check quirements Rinse aid dosing Replace peristaltic hose Annually Check the rinse aid dosing system is working and not leaking Annually Test run with functional test of whole machine Check filling and heating until it is ready for operation Annually Visual check of entire machine for leaks Annually...
  • Page 42 Daily cleaning Caution Material damage due to water ingress Electrical cables and electronic components can be damaged if they come into contact with water. • The dishwashing machine, switch cabinets and other electrical components must never be sprayed with a hose or high pressure cleaner. •...
  • Page 43 In order to prevent limescale, we recommend wiping the surfaces thoroughly dry after cleaning. Basic cleaning MEIKO offers the M-5900PCL dishwasher cleaner for regular basic cleaning of the machine. The dishwasher cleaner reduces cleaning effort and eliminates unpleasant odours. The dishwasher cleaner can be used as required. MEIKO recommends quarterly use.
  • Page 44 Operating the dishwashing machine with hard water can result in the build up of lime scale deposits in the boiler and the tank interior. In this case, descale the following components: • Inner chamber of tank • Boiler casing • Tank heating •...
  • Page 45 Dismantling and disposal In addition to valuable raw materials and recyclable materials, the packaging and the old appliance may also contain substances that are harmful to health and the envi- ronment and were required for the function and safety of the old appliance. 11.1 Disposal of packaging materials All the packaging materials are recyclable.
  • Page 46 Index Abbreviations ............45 Intended use ............9 Assembly ............. 16 Authorisation level Liability and warranty ..........4 dosing equipment ............35 service ................35 Maintenance ............39 Maintenance and cleaning ........38 Basic cleaning ............43 Maintenance table..........40 Blue operating concept ........14 Malfunctions ............
  • Page 47 Rinse aid .............. 15 Unintended use ............9 Safety ..............5 Safety symbols in the instructions ......6 Ventilating the pipes ........24, 36 Service codes ............35 Service level ............36 Wash arm ............13 Shutting down the dishwashing machine ..29, 42 Washing Spare parts ............
  • Page 48 MEIKO Maschinenbau GmbH & Co. KG Englerstraße 3 77652 Offenburg Germany www.meiko-global.com info@meiko-global.com 9760441 / Valid from: 2018-02 / Update: 2024-05...

This manual is also suitable for:

M001dwuc10m3-10

Table of Contents