Using A Channel's Feedback Delay (Channel Delay) - Roland V-Mixer VM-C7100 Quick Start Manual

Using On-Board Effects
Using a Channel's Feedback Delay
(Channel Delay)
Each channel input has its own delay effect positioned before the EQ in its
signal path. The delay is a monaural in/out, and provides various delay
effects, including a feedback echo.
fig.122
1
Press [INPUT] or [MULTI IN] to select the type of channel you
wish to set up.
2
Hold down [CH EDIT] of the channel you wish to apply the
delay effect, and press [DELAY].
The "DELAY" page of the "CH EDIT" display appears.
60
3 7 5 8 6
2 4 1
Owner's Manual "Adding
a delay-based echo
(Feedback Delay)" (p.81)