Safety Vision OBSERVER 4120 User Manual page 15

Export
Tapping the Export button on the results screen begins the
export process. Selected video can be downloaded to a USB
flash drive:
1.
Insert a USB flash drive into the USB port on the front
panel of the HVR.
2.
Tap the Export button on the results screen.
3.
Use your finger to drag the marker to where the
exported video clip will begin.
Additionally, you can also tap the time marker icon at the
bottom of the marker line to display a keypad and enter the
start time manually.
4.
Tap the Start time button.
A second marker appears.
5.
Use your finger to drag the marker to where the
exported video clip will end.
6.
Tap the End time button.
The Export prompt appears, displaying the exported video
clips length and file size, as well as the capacity of the
inserted USB flash drive.
7.
Select the exported file format:
• Synthetic data: video can only be played back using the
Observer Management System (OMS) software.
• AV data: video is exported in .avi format, which can be
played by most commonly available media players.
8.
Tap OK.
The video clip is exported automatically.
If the amount of video being downloaded exceeds the
capacity of the USB thumb drive being used, a prompt
appears requesting that an additional thumb drive be
inserted to conclude the export.
Exported files are saved on the root directory of the USB
thumb drive. Files are titled first by Unit ID, then Alarm Log,
then the date recorded.
OBSERVER 4120 USER GUIDE
13