Safety Vision OBSERVER 4120 User Manual page 36

34
Snap Setting
The Snap Setting menu configures the snapshot feature.
Still image snapshots can be taken at set intervals, instead
of full motion video, in order to conserve storage space in
certain applications.
Use the Time Snap menu to configure snapshots to be
taken during specific time periods. Select the Time snap
option at the bottom of the screen, and tap the Add button
to add a time period. Enter a Start time and End time for
the time period, then tap the setup button to configure
each channel.
Use the Trigger Snap menu to configure snapshots to be
taken during alarms or manually. Tap the Setup button
under each option to configure each channel.
Snapshot Setup screen
Select a channel in the Channel field and configure the fol-
lowing for each:
• Snap enable: select this option to enable snapshots to be
taken for this channel
• Resolution: select the resolution of the snapshots
• Quality: select the quality of the snapshots, with 1 being
best
• Upload type: select FTP (uploads the snapshots to the
FTP client) or CMS (uploads snapshots to OMS)
• Snap numbers: select the number of snapshots (between
1 and 3) taken at each interval
• Interval: select the interval that snapshots are taken (from
every 5 seconds to every 3600 seconds)
OBSERVER 4120 USER GUIDE
After making any entries, tap Save at the bottom of the screen.