Ending A Call; Placing A Call; To Place A Call Using The Handset; To Place A Call Using Hands-Free Speakerphone Mode - Polycom IP331 Owner's Manual

10. Press , and then
Enabled.
11. Press the Ok or Cancel soft keys to accept or cancel changes.
12. Press repeatedly to return to the idle display.

Ending a Call

To end a call:
Do one of the following steps:
Press the EndCall soft key.
Replace the handset.
Press if in Hands-free Speakerphone Mode, or
Headset Mode

Placing a call

You may dial 7, 10, 11-digit phone numbers or international phone
numbers. Additionally, you my call any other 3-digit extension. You
may place a call in the following ways:
• Using the handset
• Using the speakerphone
• Using the headset
• Using
Using
•
During a call, you can alternate between Handset, Headset, or
Hands-Free Speakerphone modes by pressing the
keys, or picking up the handset.
Call duration on an active call is monitored through a local call
timer. This is visible within the active call window on the graphic
display.

To place a call using the handset:

Do the following steps in any order:
1. Pick up the handset.
2. Dial the desired number using the dial pad.

To place a call using Hands-Free Speakerphone mode:

32
to change between Disabled and
or
if in
or