Ending A Call - Polycom SoundPoint IP 32x User Manual

Ending a Call

VoIPon www.voipon.co.uk sales@voipon.co.uk Tel: +44 (0)1245 808195 Fax: +44 (0)1245 808299
2. Press
Soft key labels are updated on the display showing Ignore, Answer, and
Reject.
3. Answer the incoming call.
This places the original call on hold and refreshes the soft key labels.
To answer an incoming call on a line configured for multiple Line Keys:
Use this procedure after the call prompt disappears. The call waiting prompt
Note
interrupts the active call for 10 seconds, where the incoming call can be
immediately dealt with.
Do one of the following steps:
— Answer the call by pressing
with the second incoming call.
The first call is put on hold and the second call is answered.
— Press
Soft key labels are updated on the display showing Ignore, Answer,
and Reject.
Answer the incoming call.
This places the original call on hold and refreshes the soft key labels.
Answering a call on shared line is no different than on private line, except that
there is no Reject soft key and another person on the shared line might answer
the call.
To end a call:
Do one of the following steps:
— Press the EndCall soft key.
— Replace the handset.
— Press
Headset Mode.
Using the Basic Features of Your SoundPoint IP 32x/33x Phone
to access the new call.
to put the original call on hold.
if in Hands-free Speakerphone Mode, or
or associated
if in
3 - 7