Getting To Know Your Hosted Pbx System; Before You Begin Your Installation - Polycom IP331 Owner's Manual

2

Getting to know your Hosted PBX system

Before you Begin Your Installation

The Hosted PBX phone system is designed to use your existing
broadband data connection as well as the existing data wiring in
your office. Where you don't have data wiring, you may use the
optional Wireless Transmitter and Wireless Adapters to connect
Desk Phones wirelessly. In order to begin using your new phone
system and service, you need to perform the following steps:
1. Make sure you have received all of your phones and optional
equipment
2. Go to https://cp.serverdata.net. Enter your login name and
password to the Control Panel
3. Activate your phone lines
4. Install your phones and optional equipment
You have several options regarding how to setup your new phone
system. How you choose to install your phone system will depend
on your existing data network and the phones and optional
equipment you have purchased. The diagrams below describes
options for setting up the phone system.
Standard Setup Options:
This diagram depicts your setup options. By purchasing the
optional Wireless Transmitter and Wireless Adapters you may
also connect Desk Phones wirelessly.
17