Figure 3-16: Chassis Support Screws - IEI Technology AFL3-12A/W15A-BT User Manual

Align the mounting screws on the monitor rear panel with the mounting holes on
Step 7:
the bracket.
Carefully insert the screws through the holes and gently pull the monitor
Step 8:
downwards until the monitor rests securely in the slotted holes (Figure 3-16).
Ensure that all four of the mounting screws fit snugly into their respective slotted
holes.
NOTE:
In the diagram below the bracket is already installed on the wall.

Figure 3-16: Chassis Support Screws

Secure the panel PC by fastening the retention screw of the wall-mounting
Step 9:
bracket (Figure 3-17).
Page 32
AFL3-12A/W15A-BT Panel PC