4.4
Fitting the round spray nozzle
The standard Corona spray gun is delivered with a fan spray nozzle. The nozzle can be
changed easily, as described in the following.
Caution
When changing from a fan spray nozzle to a deflector cone, the depth control must be
readjusted!
The electrode holder C4 R FM is necessary to perform the change.
2
1
Caution
When pulling out and inserting the electrode holder, ensure that the insert is not
damaged!
•
Remove powder residue from the parts removed and from the spray gun.
Caution
Be careful when mounting the electrode holder C4 R FM.
Otherwise there is a risk of injury by the electrode tip.
6
7
7
1
8
peac4_0008
The spray gun is ready for use again.
22
3
•
5
•
•
peac4_0005
5
X
Y
0390882
Unscrew the outer nut 1 from the spray gun housing 5 .
Pull the fan spray nozzle 2 off the electrode holder 3 .
Carefully pull the electrode holder 3 out of the spray
gun housing 5 .
• Carefully fit the new electrode holder C4 R FM 6
into the spray gun housing 5 .
• Slide the deflector cone sleeve 7 onto the electrode
holder 6 .
• Align the marks X and Y .
• Fasten in place using the outer nut 1 .
• Slide the deflector cone 8 back over the deflector
cone sleeve 7 .
-
PEA-C4-HiCoat FM
Maintenance and cleaning
040401_FM.doc
030301_ .doc
040402_FM.doc
01 / 2008