Toshiba VF-PS1 Instruction Manual page 236

No. Option name
LED Remote Keypad
option
(with parameter copy
(7)
function)
LCD Remote Keypad
option
(8)
RS485/USB
communication
converter unit
(for communication with
(9) multiple inverters)
Communication cable
(10)
Operation panel
(11)
Extention operation panel unit with parameter copy function. Includes LED display,
RUN/STOP key, UP/DOWN key, MODE key, ENT key, EASY key, and COPY MODE key.
(When using this unit, set as follows:  (common serial transmission waiting time) =
 (default setting). Use communication cable No. 13 to connect to the inverter.
Panel type: RKP002Z
Cable type: CAB0011, CAB0011 (1m), CAB0013 (3m), CAB0015 (5m)
This LCD operation panel unit can be installed to the inverter unit. Includes LCD display, RUN
key, STOP/RESET key, job dial, ESC key, FWD/REV key and F1 to F4 key.
Special cable is needed to connect the inverter and LCD panel.
Panel type: RKP004Z
LCD cable type: CAB0071 (1m), CAB0073 (3m), CAB0075 (5m), CAB00710 (10m)
More than one inverter can be controlled with a personal computer and so on if this unit is
used for connection between inverters and personal computer.
• Computer link: Since this unit makes it possible to connect inverters with higher-class
computer, FA computer, etc., a data communication network can be
constructed among multiple inverters.
• Communication among inverters: For the purpose of proportional operation of multiple
Unit type: USB001Z
For RS485/USB communication (between inverter and RS485/USB communication
conversion unit)
Cable type: CAB0011 (1m), CAB0013 (3m), CAB0015 (5m)
A frequency meter, frequency setup device, RUN/STOP (forward, reverse) switch are built in
this operation panel. (Model: CBVR-7B1)
J-5
Function, purpose.
inverters, a frequency data communication network can
be constructed among multiple inverters.
E6581386
10