Chapter 3 - Configuration Entering Program Mode - Toshiba STRATA CTX DKT2004-CT User Manual

Configuration
This chapter explains how to enter the Programming Mode. Your cordless digital
telephone can operate in either the DKT or the cordless mode and can be programmed
whenever the telephone is idle. When entering the program mode during cordless
operation, all calls coming to this station are ringback tone until the program mode is
ended. Entering the program mode during DKT operation has no effect on current call
status.
Entering Program Mode
1. Remove the handset from the base unit.
2. Press and hold
3. While holding
4. Release all three keys.
5. Press the
cordless handset until you toggle to the DATA STORE
settings screen.
6. Press to toggle the settings for each program step or
store (save) the setting when in DATA STORE step.
7. Press
saving changes. To save the changes step to DATA
STORE and press
Strata DKT2004-CT Cordless Digital Telephone 10/02
and at the same time.
and , press
button on the upper right side of the
at any time to exit PROGRAM without
before pressing
.
.
3
1178
1178b
17