Hardware Installation Hardware Installation; Installing Into A Chassis; Suggested Minimum Chassis Dimensions - VIA Technologies EPIA-M920 User Manual

5. 5. 5. 5. Hardware Installation Hardware Installation
Hardware Installation Hardware Installation

5.1. Installing into a Chassis

The EPIA-M920 can be fitted into any chassis that has the mounting holes for
compatible with the standard Mini-ITX mounting hole locations. Additionally,
the chassis must meet the minimum height requirements for specified areas of
the mainboard. If a riser card module is being used, the chassis will need to
accommodate the additional space requirements.

5.1.1. Suggested minimum chassis dimensions

The figure below shows the suggested minimum space requirements that a
chassis should have in order to work well with the EPIA-M920.
Figure Figure 47 47: Suggested minimum chassis dimensions : Suggested minimum chassis dimensions
Figure Figure 47 47 : Suggested minimum chassis dimensions : Suggested minimum chassis dimensions
EPIA- - - - M920 EPIA M920 User Manual User Manual
EPIA EPIA M920 M920 User Manual User Manual
57