VESPA GTS 250 I.E. Workshop Manual page 96

Engine from vehicle
- Remove the rear shock absorbers.
- Remove the hydraulic piping from the rear cal-
liper by undoing the screw indicated in the photo-
graph. Afterwards remove the retainers fixing the
piping to the engine crankcase, indicated in the
photograph.
- Use a jack to support the vehicle properly. Re-
move the engine-swinging arm fixing pin by undo-
ing the nut and the head of the pin as shown in the
photograph.
- The engine is now free.
ENG VE - 6
Vespa GTS 250 I.E.