Vespa GTS 250 I.E.
Electrical system
- Fit the battery as shown in the photograph.
N.B.
IN ORDER TO FIT THE CABLES ON THE BAT-
TERY TERMINALS CORRECTLY, REST THE
LOWER END OF THE TERMINAL SIDE OF THE
BATTERY ON THE EDGE OF THE BATTERY
WELL.
- Using the screwdriver, tighten up the battery ter-
minal cables as far as they will go, placing the
special Grover washer between the screw head
and the cable terminal.
N.B.
DO NOT USE WRENCHES TO TIGHTEN UP
THE SCREWS FOR FIXING THE TERMINALS
TO THE BATTERY TERMINALS
- Mount permanently the battery in the battery
chamber
- Refit the strap fastening the battery
ELE SYS - 39