Removal Of The Engine From The Vehicle - VESPA GTS 250 I.E. Workshop Manual

Vespa GTS 250 I.E.
Remove the lambda probe from the manifold.
CAUTION: SHOULD IT BE NECESSARY TO REMOVE ONLY THE MUFFLER TIP, ALWAYS RE-
PLACE THE GRAPHITE GASKET BETWEEN STUB AND TIP.

Removal of the engine from the vehicle

- Disconnect the battery
- Remove the helmet compartment
- Remove the side fairings and the spoiler termi-
nals.
Remove the full muffler assembly.
- Remove the air cleaner housing by unscrewing
the 3 screws indicated in the photograph.
CAUTION
THIS OPERATION MUST BE CARRIED OUT
WHEN THE ENGINE IS COLD.
- Remove the clamp off the blow-by pipe and take
the pipe out.
- Remove the clamp indicated in the photograph
and disconnect the bellows connected to throttle
body.
Engine from vehicle
ENG VE - 3