VESPA GTS 250 I.E. Workshop Manual page 85

Vespa GTS 250 I.E.
AL (FOR EXAMPLE, A PIECE OF ELECTRICAL
WIRE).
F
Specification
1 General
2 Ignition ECU
3 Injection loads relay
4 Injection ECU
5 Dashboard lighting,
intercom and anti-
theft device pre-wir-
ing
6 High and low-beam
lights, horn
7 High and low-beam
lights, electric seat
opening
8 Dashboard Fuel sup-
ply, intercom and an-
ti-theft device pre-
wiring
9 Starter motor, stop
light
USES
Desc./Quantity
Position on fuse
box: 1
Fuse: 30A
Protected circuits:
General
Fuse box arrange-
ment: 2
Fuse capacity: 7,5 A
Protected circuits:
Ignition ECU
Fuse box arrange-
ment: 3
Fuse capacity: 10 A
Protected circuits:
Injection loads relay
Fuse box arrange-
ment: 4
Fuse capacity: 7,5 A
Protected circuits:
Injection ECU
Fuse box arrange-
ment: 5
Fuse capacity: 10 A
Protected circuits:
Dashboard lighting,
intercom and anti-
theft device pre-wir-
ing
Fuse box arrange-
ment: 6
Fuse capacity: 7,5 A
Protected circuits:
High and low-beam
lights, horn
Fuse box arrange-
ment: 7
Fuse capacity: 15 A
Protected circuits:
High and low-beam
lights, electric seat
opening
Fuse box arrange-
ment: 8
Fuse capacity: 10 A
Protected circuits:
Dashboard Fuel sup-
ply, intercom and an-
ti-theft device pre-
wiring
Fuse box arrange-
ment: 9
Electrical system
ELE SYS - 35