VESPA GTS 250 I.E. Workshop Manual page 97

Vespa GTS 250 I.E.
Engine from vehicle
When refitting the engine to the scooter, carry out
the operations in reverse order from that adopted
when removing it and respect the tightening torque
shown in the Characteristics Chapter.
Check that with valve in abutment against the reg-
ister there is a small clearance.
-Check the engine oil level and if necessary top it
up with the recommended type.
- Fill the cooling circuit and rear brake circuit.
- Check the functioning of the accelerator and the
electrical devices.
- Be specially careful with the clamp fixing the
throttle body to the purifier bellows, which must be
positioned as shown in the photograph.
CAUTION
PAY PARTICULAR ATTENTION TO POSITION-
ING THE THROTTLE COMMAND TRANSMIS-
SION PROPERLY.
ENG VE - 7