Vespa GTS 250 I.E.
Specification
Fuses
Generator
Frame and suspensions
Specification
Front suspension
Front shock absorber axial travel
Rear suspension
Rear shock absorber axial travel
Brakes
Specification
Front
Wheels and tyres
Specification
Front wheels - light alloy rims
Rear wheels - light alloy rims
Front tyres
Rear tyres
Specification
Front tyre pressure (when cold)
Rear tyre pressure (when cold)
Tyre pressure (when cold) with passenger
N.B.
CHECK AND ADJUST TYRE PRESSURE WITH TYRES AT AMBIENT TEMPERATURE. REGU-
LATE PRESSURE ACCORDING TO THE WEIGHT OF THE RIDER AND ACCESSORIES
FRAME AND SUSPENSIONS
Type
BRAKES
Rear
WHEELS AND TYRES
TYRE PRESSURE
Desc./Quantity
1: 30A - 1: 15A - 3: 10A - 4: 7,5A - 1: 3A
alternating current
Desc./Quantity
Unitised body made of stamped plate
Single arm suspension (cantilever wheel) fitted
with a double-acting hydraulic shock absorber with
coaxial spring
86.5 mm
Engine with swinging fork attached to frame by
means of an arm with 2 degrees of freedom Pair
of double-acting hydraulic shock absorbers and
coaxial springs with preloading adjustment in 4
positions.
89.5 mm
Desc./Quantity
Ø 220 disc brake and floating calliper with Ø 25
mm twin plungers and hydraulic control (lever on
the far right end of the handlebar)
Ø 220 disc brake and calliper with two Ø 30 mm
counteracting plungers and hydraulic control (lev-
er on the far left end of the handlebar)
Desc./Quantity
3.00x12
3.00x12
120/70-12" Tubeless
130/70-12" Tubeless
Desc./Quantity
1.8 bar
2 bar
2.2 bar
Characteristics
CHAR - 5