SPRINTER -
ITEM CODE: BH71-A
RUDDER CONTROL HORN INSTALLA-
TION.
Rudder control horn install as same as the
way of aileron control horn. Please see pic-
tures below.
2 x12mm.
Drill a hole of the mounting rudder control
horn on to the rudder with 1.5mm diameter.
RUDDER PUSHROD INSTALLATION.
1. Rudder pushrod install as same as
the way of aileron control horn.
M2 lock nut.
.
Mark point
and drill 1.5mm
Secure
Rudder
control.
M2 .
INSTRUCTION MANUAL
Rudder pushrod
E l e v a t o r
pushrod.
Bottom side
S e c u r e
Cut
Rudder pushrod
E l e v a t o r
pushrod
21