SPRINTER -
ITEM CODE: BH71-A
ELEVATOR CONTROL HORN INSTALLA-
TION.
Elevator control horn install as same as the
way of aileron control horn. Please see pic-
tures below.
Control horn of elevator.
1) Drill through1.5mm (diameter) the el-
evator using the control horn as a guide and
screw the control horn in place.
2) Install control horn as same as picture
below.
.
2x12mm
Mark point
Drill
a
hole
1.5mm diam-
eter.
Secure.
INSTRUCTION MANUAL
ELEVATOR PUSHROD INSTALLATION.
Elevator pushrod install as same as the way
of aileron pushrod.
E l e v a t o r
pushrod
Top side
Elevator
control horn
Bottom side
E l e v a t o r
pushrod
Bottom side.
17