Table of Contents
Advertisement
SPRINTER -
ITEM CODE: BH71-A
5. Instal servo tray with aileron servo into
the wing as same as picture below.
Repeat the procedure for the other wing
half.
INSTALLING THE AILERON CONTROL HORN.
Install aileron control horn as same
as picture below.
Control horn of Aileron
2 x16mm.
.
2 x 10 mm.
INSTRUCTION MANUAL
1. Using a ruler & pen to draw a straight
line as below picture.
Bottom side
2. Locate nylon control horn, nylon con-
trol horn backplates .
3. Drill through 1.5mm (diameter) the ai-
leron using the control horn as a guide and
screw the control horn in place.
Mark line.
Drill a hole 1.5mm
diameter
Secure.
Aileron
control horn
5
Advertisement
Table of Contents
