Installing The Spinner - Black Horse Model Sprinter Instruction Manual

SPRINTER -
ITEM CODE: BH71-A

INSTALLING THE SPINNER.

Install the spinner backplate, propeller and
spinner cone. The spinner cone is held in
place using two 3mm x 12mm wood screws.
3 x 12mm
Secure
INSTALLING THE THROTTLE SERVO.
1. Install one adjustable metal connector

through the third hole out from the center of
one servo arm, enlarge the hole in the servo
arm using a 2mm drill bit to accommodate the
servo connector. Remove the excess mate-
rial from the arm.
.
Throttle servo
INSTRUCTION MANUAL
After installing the adjustable metal con-
nector apply a small drop of thin C/A to
the bottom nut. This will prevent the con-
nector from loosening during flight.
Throttle servo
Throttle servo
Secure
13