Lens Setting (Lens); Focus Setting - Sanyo VCC-ZM300A Instruction Manual

LENS SETTING (LENS)

This item allows adjustment of focus (for manual focus or autofocus) and adjustment of zoom when needed.

FOCUS setting

Setting the manual focus (MANU)
Sets a limit for near distance focusing and sets focus speed for manual focus.
1
MAIN MENU
LANGUAGE SET
CAMERA ID OFF
SYNC INT
PRIVACY MASK SET
LENS SET
LENS
FOCUS MANU ‚
ZOOM SET
1
Use the cursor button (j or l) to select SET for LENS,
then press the SET button.
The LENS screen will appear.
2
Use the cursor button (d or c) to select MANU, then
press the SET button.
The FOCUS SETTING screen will appear.
3
LIMIT NEAR focus distance setting
Use the cursor button (j or l) to move the cursor to
LIMIT NEAR, then use the cursor button (d or c) to
change the distance value. (Ex: 3M)
Available settings: 1M (meter), 3M, 10C (centimeters), 30C,
Note: Focusing becomes difficult when near distance limit is set
to less than "1M".
17
2
FOCUS SETTING
‚ LIMIT NEAR
SPEED
‚
‚
PRESET
MENU
‚
50C
3
FOCUS SETTING
1M LIMIT NEAR
2 SPEED
PRESET
OFF
BACK MENU
4
SPEED of focus setting
Use the cursor button (j or l) to move the cursor to
SPEED, then use the cursor button (d or c) to select the
focus adjustment speed value. (Ex: 3)
Available settings: 1, 2, 3, 4 (Quickest speed)
To close the menu screen or return to the previous
screen, select BACK or END for MENU and press the SET
button.
4
FOCUS SETTING
3M LIMIT NEAR
2 SPEED
OFF PRESET
BACK MENU
3M
3
OFF
BACK