Yamaha XC125 Service Manual page 65

INSPECTION AND REPAIR I ENG
I_
6. Remove:
• Guide pin (_
® Guide collar (_
e Sliding sheave (_)
7. Inspect:
__ • Secondary fixed sheave @
i_- _ , • Secondary sliding sheave (_)
_ !!i _i Scratches/Damage-* Replace as a set.
i::_ii!_i iiii:_i_i_i:_=i _ l,_i__ (_ 8. Inspect:
.... _:_,_:_;_=_:_ _-,:,_,_ , • Torque cam groove (_
_:_ _ . -'"':_::_,.,:_-_ = Guide pin/Collar (_
!-:_ Wear/Damage -* Replaceas a set.
e Oil seal(_
® O-rings (_
(_ " Damage/Wear-* Replace.
9. Measure:
® Slidingspringfree length
Out of specification-* Replace.
SlidingSpring Free Length:
Standard: 76.8 mm (3.02 in)
Limit: 71.0 mm (2.80 in)
10. Inspect:
® Clutch housing (Inner surfaces)
Scratches/Damage-+ Replace.
_: (_ Oil/Grease -. Check oil sealsand O-rings
of the secondary fixed sheave and
sliding sheave.
Clutch HousingWear Limit:
120.3 mm (4.736 in)
3-26