Crankcase Cover - Yamaha XC125 Service Manual

ENGINEASSEMBLYANDADJUSTMENT [ENG=_ _
_ (_) V-Belt
_(_ 1. Install:
® Gasket (_
® V-belt (_)
Place the V-belt around the secondary
sheave, and compress the secondary
sheave spring hard so that the V-belt
moves toward the clutch hub. And hook
onto the primary sheave.
NOTE:
• The V-belt must be installed with the arrow
marks (_) facing the direction of travel (_.
• Be sure to remove the any oil and/or grease.
CRAN KCASE COVER __
i !
: 1. Install:
e Dowel pins
* O-rings (_)
® Crankcase cover (_)
................. :: _ :. 2. Tighten:
• Screws (Crankcase cover)
NOTE:
Do not install the screw _ as it is tighten with
rear fender.
!_ Screw (Crankcase C°ver): I
10 Nm (1.0 m. kg, 7.2 ft. Ib)
3-36