Starter System - Yamaha XC125 Service Manual

EN°,NE ASSEMBL ANO AD,OSTMEN
3. Install:
o Magneto rotor (_
t6_ ® Washer (_)
• Spring washer (_)
4. Tighten:
e Nut (Magneto)
. Nut (Magneto):
\ _ v 70 Nm (7.0 m. kg, 50 ft. Ib)
"_ (_
- 5. Install:
= Cooling fan (_
(onto magneto rotor)
6. Tighten:
® Screws (Cooling fan) (_
STARTER SYSTEM
1. Install:
• Starter motor assembly
® Starter driven gear @
® Plate washer (_
• Starter clutch assembly (_
• Starter idle gear (_
2. Install:
® Oil gallery pipe (3_)
Apply grease to the O-rings (New).
e Dowel pins (_)
• Oil filter screen (_
.... .;/ • Crankcase cover
nkcase Cover):
..... _ 10Nm (1.0 rn. kg, 7.2 ftolb)
3-32