Throttle Cable Adjustment; Idle Speed Adjustment - Yamaha XC125 Service Manual

Hide thumbs Also See for XC125:
Table of Contents

Advertisement

TH ROTTLE
CABLE
ADJUSTMENT/
j INSP [
i
IDLE SPEED ADJUSTMENT
I ADJ
THROTTLE CABLE ADJUSTMENT
|
1.
Check:
® Throttle cablefree play _)
Out of specification-_ Adjust.
_
Throttle Cable Free Play (_) :
j
1,5 ~ 3.5 mm (0.06 _ 0.14 in)
2.
Adjust:
® Throttle cablefree play
By the following adjustmentsteps.
Throttle cable free play adjustmentsteps:
® Loosenthe Iocknut _).
® Turn the adjuster _) clockwiseor counter-
clockwiseuntil proper free play isattained.
• Tighten the Iocknut.
® Measurethe throttle cablefree play.
• If the free play is incorrect, repeat above
stepsuntil the proper free play isobtained.
NOTE:
After adjusting, turn the handlebarsto right
and left and make surethat the engine idling
doesnot run faster.
i
iDLE SPEED ADJUSTMENT
1.
Remove:
® Side covers(Right/Left)
2.
Start the ,engine and warm it up before
settingidle-speed.
NOTE:
A warn engine is difined asone which had been
operated for about 3 minutes at 3,000 r/rnin
with no load.
3.
Attach :
® Inductive Tachometer (YU-8036) (_
4.
Adjust:
® Idle speed
Turn the throttle stop screw (_ clock-
wise to
increase engine speed and
counterclockwise to
decrease engine
speed.
Q
2-6

Advertisement

Table of Contents
loading

Table of Contents