Steering Head Inspection; Steering Head Adjustment - Yamaha XC125 Service Manual

Hide thumbs Also See for XC125:
Table of Contents

Advertisement

STEERING
HEAD
INSPECTION/
aNSPt
1
STEERING HEAD ADJUSTMENT
ADJ
_%. ..............
....
, i:_i__
_:* _
STEERING
HEAD INSPECTION
_
......
1.
Place the scooter on its centerstand,
then
,
_
elevate the front wheel.
2.
Check:
• Steering assembly bearings
Grasp
the
bottom
of
the
forks
and
gently
rock the fork assembly back and
forth.
Looseness --, Adjust.
STEERING
HEAD ADJUSTMENT
1.
Remove:
• Steering nut cover
gr__m_,
2.
Loosen:
_J
Ring nut (Upper) C)
_
Ring nut (Lower)
(_
Use the Ring Nut Wrench (YU-33975).
3.
Tighten:
Ring Nuts (Lower and upper)
By the following
tightening steps.
R ing nuts tightening steps:
e Tighten the ring nut (lower) (_ using the
Ring Nut Wrench (YU-33975).
NOTE:
Set the
Torque
Wrench to the Ring Nut
Wrench so that they form a right angle.
Do not over-tightening.
Ring Nut (Lower):
30 Nm (3.0 m. kg, 22 ft. Ib)
Loosen the ring nut _
1/4 turn.
® Hold the ring nut (lower), and tighten the
ring nut (upper)
(_
using the Ring Nut
Wrench.
NOTE:
Set the
Torque
Wrench to the Ring Nut
Wrench so that they form a right angle.
Do not over-tightening.
Ring Nut (Upper):
30 Nm (3.0 rnokg, 22 ft. Ib)
2-1_

Advertisement

Table of Contents
loading

Table of Contents