Chassis; Brake Lining Inspection; Front Brake Adjustment - Yamaha XC125 Service Manual

BRAKE LINING INSPECTION/
FRONT BRAKE ADJUSTMENT
I Standard Spark Plug: I
U20FSR-U (N.D.)
4. Measure:
e Spark plug gap
Use a wire gauge.
Out of specification -_ Regap.
_ Spark Plug Gap: _
0.6 ~ 0.7 mm
5. Tighten:
® Spark plug
NOTE:
Before installing a spark plug, clean the gasket
surface and plug surface.
!_ Spark Plug: I
12.5 Nm (1.25 m.kg, 9.0 ftolb)
NOTE:
If a torque wrench is not available when you are
installing a spark plug, a good estimate of the
correct torque is 1/4 to 1/2 turns part finger
tight. Have the spark plug torqued to the correct
value as soon as possible with a torque wrench.
":_"_' " CHASSIS
• e _
.... _: . ... BRAKE LINING INSPECTION
.... __ 1. Activate the brake lever or brake pedal.
"' 2. Inspect:
:. • Wear indicator (_)
• .:,. _ ._!__ .... _. _. _ !i _
_.."k .:,._... ; Indicator reaches the wear limit line (_
,-,--'_::_;_:'_":, :_,_._-, -* Replace brake shoes.
[] FRONT
[] REAR
FRONT BRAKE ADJUSTMENT
1. Check:
® Free play (_)
Out of specification _ Adjust.
_ Front Brake Lever Free Play (_ : J
10 _ 20 mm (0.4 _ 0.8 in)
2-13