KYMCO PEOPLE S 125 Service Manual page 75

6
. ENGINE REMOVAL/INSTALLATION
ENGINE HANGER BRACKET REMOVAL
Remove the ignition coil from the engine
hanger.
Remove the engine hanger bracket bolt and
nut.
Remove the engine.
Remove the engine hanger bracket.
Inspect the engine hanger bushings and
stopper rubbers for wear or damage.
ENGINE HANGER BRACKET
INSTALLATION
Install the engine hanger bracket to the
engine.
Install and tighten the engine hanger bracket
bolts.
ENGINE INSTALLATION
Install the engine and tighten the engine
mounting bolts.
Torque: 5.0kg-m
Tighten the rear shock absorbers mounting
bolts.
Torque: Up side 4.0kg-m
Down side 2.5kg-m
Install the removed parts in the reverse order
of removal.
＊
Route the wires and cables properly.
After installation, inspect and adjust the
following:
• Throttle grip free play ( 3-3)
• Rear brake adjustment ( 3-8)
6-5
Engine
Bolt
Engine Hanger Bracket
Stopper Rubbers
PEOPLE S 4T
Bushings