10
. FINAL REDUCTION
BEARING REPLACEMENT (LEFT
CRANKCASE)
Remove the drive shaft.
Remove the drive shaft oil seal.
Remove the left crankcase bearings using a
bearing remover.
Drive new bearings into the left crankcase.
Install a new drive shaft oil seal.
FINAL REDUCTION ASSEMBLY
Install the drive shaft into the left crankcase.
Inspect the drive shaft and gear for wear or
damage.
Install the final gear and final shaft into the left
crankcase.
Install the countershaft and gear into the left
crankcase.
Install the washer onto the countershaft.
Install the dowel pins and a new gasket.
10-5
Bearing Remover, 17mm
Drive Shaft
Final Gear
Countershaft
Drive Shaft
PEOPLE S 4T
Pilot