11
. CRANKCASE/CRANKSHAFT
PEOPLE S 4T
Remove the oil seal from the right crankcase.
Check the oil seal lip for wear or deterioration.
The installation sequence is the reverse of
removal.
CRANKSHAFT INSPECTION
Measure the connecting rod big end side
clearance.
Service Limit: 0.55mm replace if over
Connecting Rod Big End
Turn the crankshaft bearings and check for
excessive play.
If they do not turn smoothly, quietly or if they
fit loosely in the crankshaft, replace the
crankshaft as a set.
Crankshaft Bearings
CRANKCASE ASSEMBLY
Install the crankshaft into the left crankcase.
11-4