KYMCO PEOPLE S 125 Service Manual page 55

4
. LUBRICATION SYSTEM
Install the pump driven gear and drive chain
by aligning the pump driven gear with the
cutout in the pump shaft.
Install and tighten the pump driven gear nut.
Torque: 1.0kg-m
Install the oil separator cover and tighten the
bolts.
Install the starter idle gear and starter clutch.
( 16-9)
Install the gasket and dowel pins.
Install the right crankcase cover and tighten
the nine bolts.
Torque: 0.9kg-m
＊
Diagonally tighten the bolts in 2～3
times.
Nut
Pump Driven Gear
Bolts
Oil Separator Cover
Starter Idle Gear
Gasket
Bolts
Right Crankcase Cover
PEOPLE S 4T
Starter Clutch
4-8