KYMCO PEOPLE S 125 Service Manual page 152

13
. REAR WHEEL/REAR BRAKE/
REAR SUSPENSION
REAR BRAKE ASSEMBLY
Apply grease to the anchor pin.
Apply grease to the brake cam and install it.
Install the brake shoes.
Apply engine oil to the felt seal and install it to
the brake cam.
Install the brake arm.
＊
Align the wide groove on the wear
indicator plate with the wide tooth of the
brake cam.
Install and tighten the brake arm bolt.
＊
Align the scribed line on the brake arm
with the punch mark on the brake cam.
Torque: 1.0kg-m
Install the brake arm return spring.
Install the brake arm pin.
Connect the brake cable and install the
adjusting nut.
Install the rear wheel. ( 13-3)
Adjust the rear brake lever free play. ( 3-8)
REAR SHOCK ABSORBER
REMOVAL
Remove the frame body cover. ( 2)
Remove the air cleaner case. ( 5-13)
13-5
Brake Arm
Brake Cam
Bolt
Brake Arm
Adjusting Nut
Bolt
PEOPLE S 4T
Brake Cable
Brake Arm Pin
Bolt